
|
Nitrogen's quality |
|
| Maximum accumulation pressure | 8 barg |
| Dew point, referred to atmospheric pressure | < -40 |
|
Electrical connections |
|
| Tension | 220V Single phase 50 Hz. |
| Installed electrical power | 0,5 kW |
|
Air supply |
|
| Requested air quality (minimum) | ISO 8573-1: class 1-4-1 |
| Suggested air quality | ISO 8573-1: class 1-2-1 |
| Pro column noticed air pressure (generator) | 9,5 barg |
| Pressure dewpoint | < +3°C |
| Oil, maximum permitted concentration | < 0,003 mg/m3 |
| Size of solid particles | < 0,01 μm |
| Maximum concentration of particles (dirt) | < 0,1 mg/m3 |
| Room temperature min. / max. | +3°C / +40°C |
|
Terms of reference |
|
| Performance datas indicated in the catalog, refer to the generator's functioning at the conditions listed below: | |
| Installation | Indoor |
| Air quality | Clean and free of contaminants |
| Pressure of reference | 1000 mbar |
| Operating temperature | 20°C |
| Reference RH | 0% |
| Altitude of performance tests | ~ 250 mslm |
NIMOS Nitrogen generatores are build in accordance to current European standards.
The constant monitoring of the compliance of the business quality system to the UNI EN ISO 9001:2000 regulation has been assigned to IMQ, a member of IQNET.
NIMOS N2FOOD Nitrogen generators produce E941 Nitrogen, which is suitable for food use and is compatible with the parameters set by EU Directives 2000/63/CE, 95/2/CE and with the EU regulation n. 178/2002.
In order to keep the quality of nitrogen suitable for food use, the supply of compressed air must be free of contaminations. The owner of the place, where the generator is installed will therefore be responsible for its maintainance as well as for the respect of standard parameters in terms of food hygiene all around the device.
The generator's efficiency is conditioned by air pressure, ambience temperature and relative humidity. Please contact us in order to calculate generator's performances with terms of rederence which are different from those shown.
Indicated datas refer to optimal working conditionsand may be subject to a tolerance of ±5%.









